Download

Rinse out the tank, the stones and all the accessories.

If you purchased one of our sea creatures: seahorse, sea dragon,lionfish, or snail please shorten the fish line to the desired length and attach the suction cup firmly to the bottom or the bottom back of the tank.

If you purchased the glow in the dark stones, add the stones.

If you purchased a pack of magic water balls, please add about two dozen of them as well. Fill up the tank with distilled water up to the marked line.
Insert the jellyfish… When inserting the jellyfish place upside down so no air will be trapped under the jellyfish’s bell.
You can insert the jellyfish with your hand or with cooking tweezers. Shake out the jellyfish until all the air bubbles come off the tentacles and the bell.
This will ensure that the jellyfish will not float on the top.
To get the maximum results leave the tank on with the jellyfish in the water for about 24-48 hours.
If you experience problems with the jellyfish then open up the tank cover and shake it out again to remove all the excess air. This will enable the jellyfish to move, dance and swirl around best.
Operating instructions:
Insert 3 AA batteries or connect the power adapter (sold seperately).To start the tank press the On/Off button.The tank will turn on and the LED lights will continuously change. To choose you own tank color press the light button until you find your desired color.
Download

Enjuague el tanque, las piedras y todos los accesorios.

Si has adquirido una de nuestras criaturas de mar: caballitos de mar, dragón de mar, peces león, o caracoles favor acorta la línea de pescar a la longitud deseada y fija la ventosa con firmeza contra la parte inferior o la parte inferior trasera del tanque.

Si compraste las piedras oscuras que brillan en la oscuridad, agrega las piedras.

Si has adquirido un paquete de bolas de agua mágicas, por favor, agrega una docena de ellas también.

Llena el depósito con agua destilada hasta la línea marcada.

Inserta las medusas…

Al insertar las medusas ponlas al revés para que no quede aire atrapado debajo de la campana de la medusa.

Puedes insertar la medusa con la mano o con unas pinzas de cocina.Sacude las medusas hasta que todas las burbujas de aire salgan de los tentáculos y de la campana.

Esto asegurará que las medusas no flotarán en la parte superior.

Para obtener los máximos resultados deja el tanque con las medusas en el agua durante aproximadamente 24-48 horas.

Si experimentas problemas con las medusas entonces, abre la tapa del tanque y agita de nuevo para eliminar todo el exceso de aire.

Esto permitirá a las medusas a moverse, bailar y agitarse alrededor de mejor forma.

Instrucciones de uso:

Inserta 3 pilas AA o conecta el adaptador de corriente (se vende por separado).

Para iniciar el tanque presiona el botón Encendido / Apagado.

El tanque se encenderá y las luces LED cambiarán continuamente.

Para elegir tu propio color de tanque pulsa el botón de la luz hasta que encuentres tu color deseado.